Voor vrienden van ons hebben wij een bijzonder project uitgevoerd.
Het idee was eenvoudig, we wilde een foto in plexiglas / Arcylaat maken.

Een foto is Acrylaat is echter niet eenvoudig, er zit veel informatie verstopt in een foto.
Met frezen en graveren kun je dit niet direct in een project zichtbaar krijgen.

Door gebruikt te maken van freeware software van Jason Dorie hebben wij een cool effect weten te maken.
Dit effect maakt een halftone, ofwel een zwart wit effect waarmee een foto van een afstand zichtbaar wordt.

Helaas heb ik geen foto’s kunnen maken, maar gelukkig wel een video.

In de video is goed te zien dat dit enorm veel werk is, alleen het frezen is al uren en uren werk.
Helaas maakt dit projecten als dit dus niet erg goedkoop, maar mooi is het absoluut.

Berry, Marianne en Bobby… Ik hoop dat jullie er blij mee zijn….

55 Comments

  1. handyss Says Beantwoorden

    verrryyyy nicee. congratulations for this excelent work.

  2. automateanything Says Beantwoorden

    great project, shame the mans eye came out black, or was that just the camera angle?

  3. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    True… i had set a minimum dot size… That was not the best choice.. 🙂 But if you see it in real life from a distance that’s less visible. But next time i will not set a minimum dot size anymore…

  4. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    True… i had set a minimum dot size… That was not the best choice.. 🙂 But if you see it in real life from a distance that’s less visible. But next time i will not set a minimum dot size anymore…

  5. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    True… i had set a minimum dot size… That was not the best choice.. 🙂 But if you see it in real life from a distance that’s less visible. But next time i will not set a minimum dot size anymore…

  6. automateanything Says Beantwoorden

    cool project any way and another learning curve done! how long did the job take to drill the raster?

  7. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Indeed a learning curve…. I forgot to note the machining time… but its a long time thats for sure.. I think it was between 3 and 4 hours for the drilling cycle if i recall correctly..

  8. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Indeed a learning curve…. I forgot to note the machining time… but its a long time thats for sure.. I think it was between 3 and 4 hours for the drilling cycle if i recall correctly..

  9. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Indeed a learning curve…. I forgot to note the machining time… but its a long time thats for sure.. I think it was between 3 and 4 hours for the drilling cycle if i recall correctly..

  10. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I think that i will choose that myself again next time, unless you pay the invoice 😉

  11. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I think that i will choose that myself again next time, unless you pay the invoice 😉

  12. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I think that i will choose that myself again next time, unless you pay the invoice 😉

  13. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I understand…

  14. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I understand…

  15. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I understand…

  16. Manuel Prietos Says Beantwoorden

    Todos tus proyectos me gustan,incluido este.

  17. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Agradable de escuchar, gracias a Manu

  18. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Agradable de escuchar, gracias a Manu

  19. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Agradable de escuchar, gracias a Manu

  20. LoomisRex Says Beantwoorden

    Looks very nice m8 🙂

  21. DrFiero Says Beantwoorden

    It has to be said… HE SPEAKS! All this time I thought it was just you speaking in cool electronica music. 🙂

  22. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Amigo

  23. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Amigo

  24. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Amigo

  25. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Haha lol… Yeah well listening to it i do think it will be only subtitles again next time 😉

  26. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Haha lol… Yeah well listening to it i do think it will be only subtitles again next time 😉

  27. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Haha lol… Yeah well listening to it i do think it will be only subtitles again next time 😉

  28. phonyization Says Beantwoorden

    bravo…good work

  29. gregoryscottsr Says Beantwoorden

    The lights are nice touch.

  30. DrFiero Says Beantwoorden

    How about subtitles AND speaking? You can use them as a script. 😉 Makes the video’s feel more personal when there’s at least some voices.

  31. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thank you !

  32. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thank you !

  33. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thank you !

  34. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Gregory.. These are 5050 Led strips, found all over Ebay. I use these a lot in my projects.

  35. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Gregory.. These are 5050 Led strips, found all over Ebay. I use these a lot in my projects.

  36. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Gregory.. These are 5050 Led strips, found all over Ebay. I use these a lot in my projects.

  37. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I will think about it DrFiero.. 🙂 First lets see if i get negative feedback on the voice lol But indeed, i do like videos with some voice in them to…, also if the people talk into the camera, but will thats not my strong side 😉

  38. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I will think about it DrFiero.. 🙂 First lets see if i get negative feedback on the voice lol But indeed, i do like videos with some voice in them to…, also if the people talk into the camera, but will thats not my strong side 😉

  39. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    I will think about it DrFiero.. 🙂 First lets see if i get negative feedback on the voice lol But indeed, i do like videos with some voice in them to…, also if the people talk into the camera, but will thats not my strong side 😉

  40. flyxtube Says Beantwoorden

    Another GREAT IDEA from ROBOCNC……THANK YOU BRAVISSIMO

  41. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks flyxtube…., !

  42. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks flyxtube…., !

  43. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks flyxtube…., !

  44. José luis Says Beantwoorden

    Gran trabajo, eres el mejor…
    Great Job, You aré the boss…

  45. Jason Dorie Says Beantwoorden

    As a tip, if you use the GCode output from the Halftoner program itself, the dots are cut in a very efficient back & forth raster pattern. You can also tell your CAM software to cut the dots in “selection order” which usually works too. I love the look of the image cut into acrylic! I’ve been wanting to do one of these myself.

  46. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks for the reply and tips Jason…. Nice to get a comment from the software guru himself 🙂 Keep us updated when you make something new !!

  47. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks for the reply and tips Jason…. Nice to get a comment from the software guru himself 🙂 Keep us updated when you make something new !!

  48. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks for the reply and tips Jason…. Nice to get a comment from the software guru himself 🙂 Keep us updated when you make something new !!

  49. Lisa van Dijk Says Beantwoorden

    Is dit ook mogelijk te doen op dezelfde manier maar dan met de laser?

    • Robo Says Beantwoorden

      Hoi Lisa,

      Foto gravure met een CNC laser gebeurt op een andere wijze.
      Maar als uw eigenlijke vraag is of een laser een foto kan maken in Acrylaat is het antwoord volmondig JA.
      Sterker nog dat kan op een veel mooiere manier, al was bij dit project het doel natuurlijk het abstracte.
      Kunnen wij met de laser iets voor u betekenen? Nee, helaas beschikken wij op dit moment nog niet over een laser graveer machine.
      Wel zal dit in de nabije toekomst in de planning liggen.

      Mvg, Marcel

  50. Kees Moret Says Beantwoorden

    Leuk! Weer en idee opgedaan!

  51. Patrick Foley Says Beantwoorden

    should you have fliped the image

  52. hillmanant Says Beantwoorden

    the music ruins this video for me but very informative thanks

Leave a Reply to Lisa van Dijk

Klik hier om je antwoord te annuleren.