31 Comments

  1. First2ner Says Beantwoorden

    [..YouTube..] what? do you use as far as software goes to make this happen?

  2. Marcelmx3 Says Beantwoorden

    [..YouTube..] Its good to know the the man of leds? it self likes this project.. :)Thanks…

  3. Marcelmx3 Says Beantwoorden

    [..YouTube..] Well There are a lot of different ones that could do this, in this case its Artcam.Cheaper would be Vectric V-carve pro? or aspire i think..

  4. First2ner Says Beantwoorden

    [..YouTube..] What do those programs put? out, what types of files?

  5. Marcelmx3 Says Beantwoorden

    [..YouTube..] Artcam is the design software and can be saved with the art extension.But after processing? by artcam there is a text file made called Gcode that has all the coordinates for the machine controller (Mach3)

  6. First2ner Says Beantwoorden

    [..YouTube..] Cool thanks, btw I love your cnc, how you did it,? costom parts and all!

  7. Marcelmx3 Says Beantwoorden

    [..YouTube..] Thanks,? always nice to hear… Lots to come so stay tuned 🙂 and don’t forget to vote 😉

  8. mattlapain Says Beantwoorden

    [..YouTube..] I can’t believe how well everything that you have made has come out soo well. Really you do an excellent job. I hope to see more and learn as much as I can. Your truly a? guru for all of us. Thanks

  9. Marcelmx3 Says Beantwoorden

    [..YouTube..] Thanks a lot Matt.. I only show the excellent jobs 🙂 Of course for me its the same as any other, a lot of new things fail the first time and get refined before the cam starts recording :)Thanks for calling me a Guru.. Im only in the CNC hobby for a few months.. so thats nice to hear..And thanks? for rating the vid 😉

  10. Dividedhead Says Beantwoorden

    [..YouTube..] Top, top job!!!! Such a great end result! I don’t think I’ve seen it anywhere? How long did? this take? I’ve had a wander around your website last week too…. Very nice work 🙂 Now I’m going to have to go and see how much you want for these types of sign…. Then I’ll have to think of something to write on one ! 🙂 Love the router dancing too LOL. Very upbeat tune as well…. Quite far from my own choices. But fit the vid’ very well. :)Ralph.

  11. Marcelmx3 Says Beantwoorden

    [..YouTube..] Thanks again Dividedhead…About the result, well everybody using CNC can make it I think, but most dont try the 3D and V-carve and stay with the 2D engravings.. True my website you can use the contact form if you have sort of design you want.Or use the email adres? info ad …. The music is not really my thing to, but i just search to the correct audio length :)Marcel aka Robo

  12. bigbigjimbo Says Beantwoorden

    [..YouTube..] Are you using? Vectric v-carve?

  13. Marcelmx3 Says Beantwoorden

    [..YouTube..] @bigbigjimbo? This could be done by vcarve indeed, although this one is done with artcam

  14. bigbigjimbo Says Beantwoorden

    [..YouTube..] So you are? using the same as I am

  15. bigbigjimbo Says Beantwoorden

    [..YouTube..] @bigbigjimbo So you are using the same as I am. your pieces are of very good quality i checked your website ….Like.?

  16. karandex Says Beantwoorden

    [..YouTube..] what is the spindle? rpm which v carve bit is used, can give me the name, is it the straight edge carbide one ? Just make a post or video of your bit collection because choosing right bit is very important

  17. Marcelmx3 Says Beantwoorden

    [..YouTube..] @karandex Sorry i do not remember for this video, and i used different speeds an bits for the different engravings.Take a look at? some other video’s as they might answer your questions…Also have a look at my website with some more info…flat engravings would indeed be done by straight edge solid carbide bits (1 flute).Use ‘climb milling’ and cool it with air (the blue hose in the vid)

  18. sukalo Says Beantwoorden

    [..YouTube..] Great “How to video” is air cooling necessary ? How big compressor would you? recommend, that dont charges all the time if it is in the same room?

  19. Dejan Vrta?nik Says Beantwoorden

    Great “How to video” is air cooling necessary ? How big compressor would you recommend, that dont charges all the time if it is in the same room?

  20. RoboCNCnl Says Beantwoorden

    [..YouTube..] @sukalo Hi Sukalo,Well at the time of this video i used a cheap? ‘home depot’compressor….This works fine, but every 3minutes it switches on, and makes a horrible sound.Now i have a 200l/min compressor with a 200l tank.But the best is it is a 2 cilinder, and therfor it makes not much noise (you could just speak to each other)

  21. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    @sukalo Hi Sukalo, Well at the time of this video i used a cheap ‘home depot’compressor…. This works fine, but every 3minutes it switches on, and makes a horrible sound. Now i have a 200l/min compressor with a 200l tank. But the best is it is a 2 cilinder, and therfor it makes not much noise (you could just speak to each other)

  22. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    @sukalo Hi Sukalo, Well at the time of this video i used a cheap ‘home depot’compressor…. This works fine, but every 3minutes it switches on, and makes a horrible sound. Now i have a 200l/min compressor with a 200l tank. But the best is it is a 2 cilinder, and therfor it makes not much noise (you could just speak to each other)

  23. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    @sukalo Hi Sukalo, Well at the time of this video i used a cheap ‘home depot’compressor…. This works fine, but every 3minutes it switches on, and makes a horrible sound. Now i have a 200l/min compressor with a 200l tank. But the best is it is a 2 cilinder, and therfor it makes not much noise (you could just speak to each other)

  24. BuickDoc Says Beantwoorden

    [..YouTube..] @sukalo I built a shed outside my shop for my compressor and ran a pipe through the wall. The neighbor gets the noise,? not me!!

  25. BuickDoc Says Beantwoorden

    @sukalo I built a shed outside my shop for my compressor and ran a pipe through the wall. The neighbor gets the noise, not me!!

  26. Avi Ganon Says Beantwoorden

    your work is amazing !!!

  27. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Avi Ganon !

  28. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Avi Ganon !

  29. RoboCNC Frees- & Graveerwerk Says Beantwoorden

    Thanks Avi Ganon !

  30. Eddie Somesan Says Beantwoorden

    Great work. Just a question…what stepover did you use on the flat engraving? Looks like I can`t get it right.

Leave a Reply to sukalo

Klik hier om je antwoord te annuleren.